Suggested Citation:
Passmore, Reid, Kari Watkins, Randall L. Guensler (2024)

Simulating Bike-Transit Trips Using BikewaySim and TransitSim

. Institute of Transportation Studies, University of California, Davis, Research Report UCD-ITS-RR-24-24

Abstract:

Planners and engineers need to know how to assess the impacts of proposed cycling infrastructure projects, so that projects that have the greatest potential impact on the actual and perceived cycling safety are selected over those that would be less effective. Planners also need to be able to communicate these impacts to decision-makers and the public. This research addresses these problems using the BikewaySim cycling shortest path model. BikewaySim uses link impedance functions to account for link attributes (e.g., presence of a bike lane, steep gradients, the number of lanes) and find the least impedance path for any origin-destination pair. In this project, BikewaySim was used to assess the impacts of using time-only and time with attribute impedances, as well as two proposed cycling infrastructure projects, on 28,392 potential trips for a study area in Atlanta, Georgia. These impacts were visualized through bikesheds, individual routing, and betweenness centrality. Two metrics, percent detour and change in impedance, were also calculated. Results demonstrate that BikewaySim can effectively visualize potential improvements of cycling infrastructure and has additional applications for trip planning. An expanded study area was also used to demonstrate bike + transit mode routing for four study area locations. Visualizations examine the accessibility to TAZs, travel time, and the utilized transit modes for each location. Compared to the walk + transit mode, the bike + transit mode provided greater access to other TAZs and reached them in a shorter amount of time. The locations near the center of the transit network where many routes converge offered the greatest accessibility for both the bike + transit and walk + transit modes. The difference in accessibility was greatest for locations near fewer transit routes. This research demonstrated how BikewaySim can be used to both examine the current cycling network and show changes in accessibility likely to result from new infrastructure. Both BikewaySim and TransitSim are open-source Python based tools that will be made available for practitioners to use in bicycle network planning. Future research will focus on calibrating link impedance functions with revealed preference data (cycling GPS traces) and survey response data (surveys on user preference for cycling infrastructure).